加工参数计算 Torque and machine output - 扭矩和机床输出功率 螺纹直径 [mm]: 螺距 [mm]: 切削速度 [m/min]: 机床效率: Choose the material!P 1.1 Unalloyed and low-alloy steels up to 800 N/mm²P 1.2 Unalloyed and low-alloy steels 800 N/mm² bis 1200 N/mm²P 1.3 Unalloyed and low-alloy steels 1200 N/mm² bis 1400 N/mm²P 2.1 High alloy steels up to 1400 N/mm²M 1.1 Corrosion and acid proof steels + Duplex 800 N/mm²M 1.2 Corrosion and acid proof steels + Duplex 800 N/mm² bis 1300 N/mm²K 1.1 Cast iron, nodular cast iron, Vermicular graphite cast iron, malleable cast iron up to 800N/mm²K 1.2 Ausferritic cast iron (ADI) + Hard casting up to 1400 N/mm²N 1.1 Aluminium wrought alloysN 1.2 Aluminium cast alloys <=12% SiN 1.3 Aluminium cast alloys >=12% SiN 2.1 Copper+ Copper alloys (long-chip.)N 2.2 Copper alloys (short-chip.)N 2.3 High-strength copper alloys up to 800 N/mm²N 3.1 Zinc alloysN 4.1 Magnesium wrought alloysN 5.1 ThermoplasticsN 5.2 Fibre-reinforced synthetics + DuroplasticsS 1.1 Ni -, Fe- or Co- base-Superalloys up to 800 N/mm²S 1.2 Ni -, Fe- or Co- base-Superalloys up to 1600 N/mm²S 2.1 Titanium+ Titanium alloys up to 800 N/mm²S 2.2 Titanium+ Titanium alloys up to 1300 N/mm²H 1.1 Hardened steels up to 55 HRcH 1.2 Hardened steels 55 HRc up to 63 HRcH 1.3 Hardened steels 63 HRc up to 65 HRc NORIS-MGB (setting value overload clutch) torque [Nm]:NORIS-Spanlos (setting value overload clutch) torque [Nm]:NORIS-MGB (sharp) torque [Nm]:NORIS-MGB (blunted) torque [Nm]:NORIS-Spanlos torque [Nm]: 输出功率[KW]:
